Compx-elock Network Fridge Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Compx-elock Network Fridge. CompX eLock Network Fridge User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
CompX eLock Instructions
Thank you for purchasing the CompX eLock. The information contained in these instructions is intended to serve as a
guide so as to allow the eLock to be quickly and easily put into service. CompXs Network eLock (if equipped) can be
configured to work in conjunction with existing 802.11g or Ethernet networks, making it the 1st and only product to
provide networked access control and temperature monitoring in one device.
For complete set up and installation instructions for networked and stand-alone eLocks, please see the “Help” section
in CompX’s LockView v4 software.
1. 3-position LCD adjustment
2. Dot matrix LCD
3. Wi-Fi antenna cover (if equipped)
4. Red LED & Green LED
5. Network button (blue LED)
6. Alpha-numeric keypad
7. USB port (USB A to mini B cable)
8. “CLEAR” button
9. Beeper location
10. “UP” button
11. “BACK/CANCEL button
12. “MENU” button
13. “NEXT/SELECT” button
14. “DOWN” button
15. - button
16. + button
17. “LO BATT” indicator
18. Battery pack (6 AA) (BATTERIES
NOT INCLUDED)
19. AC adapter plug-in (2.5 mm)
(ADAPTER NOT INCLUDED)
20. Ethernet connector (if equipped)
(ETHERNET CABLE NOT INCLUDED)
21. Magstripe reader location (if
equipped)
22. “ENTER” button
23. HID PROX or HID iCLASS reader
location (if equipped)
24. Door switch connector (SWITCH
NOT INCLUDED)
25. Dual eLatch connector (if
equipped) (LATCH NOT INCLUDED)
26. RTD probe for temperature
monitoring (if equipped)
Vue de la page 0
1 2 3 4 5 6 ... 15 16

Résumé du contenu

Page 1 - CompX eLock Instructions

1CompX eLock InstructionsThank you for purchasing the CompX eLock. The information contained in these instructions is intended to serve as a guide so

Page 2 - Care and Cleaning

10Manual Programming Guide continued4. Highlight SET YOUR 2nd PIN and press “NEXT/SELECT.” (EDIT YOUR 2nd PIN will appear if a second PIN credential

Page 3 - Operating the eLock

11Manual Programming Guide continuedSet Beep VolumeUsing SET BEEP VOLUME, the audible beep can be adjusted.1. Press “MENU.” LOGIN PLEASE wil

Page 4 - LockView Mode Instructions

12Installing the VERTICAL mount refrigerator kitMount the strike at least 4" from NON-HINGED EDGE of the refrigerator.There are two main p

Page 5

13Installing the VERTICAL mount refrigerator kit cont.The CompX eLock can be mounted to the front of the refrigerator by using the provided foam tape

Page 6

14Installing the HORIZONTAL mount refrigerator kitMount the strike at least 4" from the top of the NON-HINGED EDGE of the refrigerator.There are

Page 7 - Manual Programming Guide

15Installing the HORIZONTAL mount refrigerator kit cont.Route cable behind door gasket to hinge point. Probe should be as close to the product as poss

Page 8 - Credential Menu

16CompX eLock® AccessoriesPart #: 332331000000 Rev A.Copyright 2010 © CompX Security Products / 847.752.2500 / compx.com / 715 Center St., Grays

Page 9 - (KEYPAD, PROXCARD

2CompX eLock Instructions continuedUnit Features:w Choose 802.11g or Ethernet Networked configurations that uses the facilities existing infrastr

Page 10 - LCD Backlight

3CompX eLock Instructions continuedSetting up the eLockGetting Started Out of the Box If the eLock is stand-alone (direct connection to LockView Softw

Page 11 - Reset Net Schedule

4CompX eLock Instructions continuedMethods to begin building a database of eLocks in CompX’s LockView SoftwareNote: Supervisor, User and parameter cha

Page 12 - Install the strike

5CompX eLock Instructions continuedPASSAGE MODE(LockView software required) To hold the latch bolt in the open position indefinitely, there is a

Page 13 - mount refrigerator kit cont

6CompX eLock Instructions continuedBelow are the FACTORY DEFAULT SETTINGS for eLocks equipped with temperature monitoring.NOTE:1) Permission

Page 14

7Manual Programming GuideTemperature Menu (if equipped)CompX eLocks equipped with temperature monitoring have a number of features that can be adjuste

Page 15 - Drilling Installation

8Manual Programming Guide continuedLOG INTERVALS(THE eLock RECORDS IN MEMORY TEMPERATURE DATA THAT CAN BE RETRIEVED USING LOCKVIEW. USING L

Page 16 - software

9Manual Programming Guide continued9. CREDENTIAL NAME ENTRY will appear. Press 2 - 9 for A - Z; press 1 for -, ., + or _ ; press 0 for “space”; pres

Commentaires sur ces manuels

Pas de commentaire